1969 Chevrolet Camaro Convertible Restomod Pro Touring LS3 L99 Resto Project Car

  • Price: Ask a price!
  • Location: Titusville, Florida, United States
  • Make: Chevrolet
  • Model: Camaro
  • SubModel: SS/RS
  • Type: Convertible
  • Trim: Restomod / Pro Touring
  • Year: 1969
  • VIN: 124679N688064
  • Color: To be decided
  • Engine size: LS3/L99 6.2L (only 51 miles on it!)
  • Number of cylinders: 8
  • Power options: Power Windows
  • Fuel: Gasoline
  • Transmission: Automatic
  • Drive type: RWD
  • Interior color: Black
  • Drive side: Left-hand drive
  • Options: Convertible, Leather Seats
  • Vehicle Title: Clear

1969 Chevrolet Camaro Restomod / Pro Touring Description

I have too many projects on my plate, its as simple as that. I just bought a restomod 1964 Corvette Stingray convertible (almost fully completed) and I also have a restomod 1970 Shelby Mustang convertible being built currently too. So I am parting with the 3rd project which is my 1969 Camaro convertible so I can get the other two projects completed. Alot has gone into this car and when it is done it is going to be incredible looking, so I hope it goes to a good home.


This car was originally a Dover White 1969 Camaro convertible with a black roof with black hockey stripe and dark blue interior (pictures attached)
It was a V8 convertibleIt was built in the Norwood assembly plant
The Engine and transmission came out of 2010 Camaro SS that got hit in the back end. The engine has only 51 miles on it, no that is not a typo...the engine only has 51 miles on it! The engine was tested and running stellar before I acquired it. I have a video somewhere of the engine running when I first bought it and Im trying to locate that. Unfortunately at the first garage (where this car was being put together) an employee of that garage stole the fuel injectors off the engine, the front pulley system and some parts off the Magna supercharger so that has to be noted.
This car body has been pretty much been built from scratch by highly renowned car builder Brian Johnston of Screaminperformance.com

Parts:

1969 Camaro body with the following new parts

1) Smooth Firewall installed

2) Upper and lower cowl installed

3) Windshield pillar complete installed

4) Inner and outer rockers RH+LH installed

5) Complete floor pan installed

6) Convertible brace kit floor

7) Trunk pan complete installed

8) Frame rails RH + LH 1/8 installed

9) New doors complete RH and LH

10) New quarters RH and LH

11) Tail pan

12) Inner tail pan

13) Trunk dropoffs RH and LH

14) Trunk lip with spoiler

15) Fenders RH and LH

16) SS hood

17) Lower Valance

18) Header panel

19) Inner Fender wells RH and LH

20) Core support

21) rear upper body panel

22) New hinges and bolts doors

23) Inner and outer tubs deep tubs (mini tubbed)

24) Also comes with original doors with glass and regulators etc. has smoked glass kit

More parts:

1) Stainless works LS3 Headers

2) American Autowire wiring harness

3) 9in Ford Housing

4) Fiberglass 2011 Camaro dash

5) 2011 Camaro center console

6) 2011 shifter, AC Vents, Gauges, Clusters

7) Aluminum radiator with fans/ black

8) Convertible top body trim

9) Convertible rain gutter

10) Chrome rear bumper with brackets

11) Tilt steering Column black

12) Art Morrison Subframe with Sway bar and transmount and also LS motor mounts

13) Ride tech 4 link

14) Billet hood hinges

15) Billet tail lights

16) Billet door vents

17) New Convertible top actuators

18) New power window motors. Electric light

19) AFCO 8 inch 200lb coil springs rear set

20) Hyper coils 475lb Coil springs front set

21) Strange 5in Double adjustable Coil over shocks set

22) Competition Cam LS1 3726R/3727R HR112.0 54-000-11

23) DSE RS motor kit headlights

24) Engine harness and ECM and throttle pedal

25) New canvas Convertible top and frame and convertible top pump/power top hose kit/cylinders

26) Fesler Door and Rear panels, hardware and armrest

27) Magnacharger supercharger TVS 2300 (see note above)

28) Door handles/visor supports

29) More parts are there like Marquez Billet door jam louvers and stainless door strikers etc etc etc ....too many to list

Please NOTE: This car is on a rolling jig.Car cannot be removed from jig until sheetmetal is final welded for strength so rolling jig is included.All parts going along with the rolling jig will be palletized and boxed up so buyer will have to go on U uship or similiar to arrange shipping to destination

THIS VEHICLE IS BEING SOLD AS-IS WITH NO WARRANTY WRITTEN, EXPRESSED OR IMPLIED. PAYMENT IS ACCEPTED VIA CASHIER'S CHECK OR WIRE TRANSFER. A $2000.00 NON-REFUNDABLE DEPOSIT IS DUE WITHIN 48 HOURS OF LISTING'S CLOSE AND FULL PAYMENT IS DUE WITHIN 7 DAYS OF AUCTION'S CLOSE, NO EXCEPTIONS. ONCE FULL PAYMENT IS MADE AND FUNDS HAVE CLEARED, TITLE WILL BE SENT TO THE BUYER ALONG WITH BILL OF SALE AND ANY PERTINENT DOCUMENTS OR RECORDS AVAILABLE WITH THE PURCHASE.Call Brian at321-607-6847if you have any questions on this car. THIS CAR IS FOR SALE LOCALLY AND WE RESERVE THE RIGHT TO END THIS EBAY LISTING AT ANY TIME.

On Oct-22-17 at 14:23:11 PDT, seller added the following information:

More parts and more photos at this link

On Oct-22-17 at 14:25:53 PDT, seller added the following information:

More parts and pictures at this link

On Oct-22-17 at 14:31:56 PDT, seller added the following information:

More parts and pictures at this link 

On Oct-23-17 at 18:43:53 PDT, seller added the following information:

More parts and pictures here (ill try this again, ebay isnt letting me post the link)