1966 Chevy C10 short bed Fleetside - 383 stroker - 700R4 - project truck

  • Location: Park Hills, Missouri, United States
  • Make: Chevrolet
  • Model: C-10
  • Year: 1966
  • Engine size: 383 stroker
  • Transmission: 700R4
  • Vehicle Title: Clear

1966 Chevrolet C-10 Description

I've poured my heart into my dream truck but life happens and priorities change......
I have over $30,000 in printed receipts, not counting the cash I've spent and the $9500 original purchase price for the truck.
There is over $40,000 in this truck as it sits.
New engine, new transmission, new suspension, new rear end, new spindles and brakes, new fuel tank.....etc..

I am selling $40,000 worth of truck for $22,950.
____________________________________________________________________________________________
Here's my list:

New 383 Stroker-Aluminum heads-Eagle rotating assy. 450hp/480tq (I have a spec sheet on this full Roller engine)
New Monster transmission- 700R4 with 2200 stall
12 bolt rear end with new Duragrip posi-3.73 gears- Moser street axles
Wilwood 2.5" drop spindles
Wilwood 14" front drilled/vented rotors and 6 piston calipers
Wilwood 12" rear drilled/vented rotors and 4 piston calipers
Wilwood Master cylinder
All brake lines and emergency brake cable
New under dash A/C unit with electronic controls
New A/C condenser
New Aluminum A/C 4 port blocks to pass through firewall
New Classic Performance Products tubular trailing arms
New CPP tubular upper control arms
New CPP tubular lower control arms
New CPP front and rear sway bars
New CPP front and rear shocks
New CPP 20 gallon Aluminum fuel tank set up for fuel injection or carburetor
New CPP fuel sending unit
New CPP quick ratio steering box
New CPP steering linkage kit including rag joint and hose kit
New lowered coil springs front and rear with 3 sets of rear coils to adjust the ride height (4.5" front drop/6" rear drop in pics)
New drop Cross member with Anti squat brackets and 3" exhaust cut outs
New IDITIT tilt steering column
New American Autowire wiring kit with switches and hardware
New tubular engine mounts and transmission crossmember
New Holley fuel sytem with dual Billet fuel filters set-up for Holley Sniper injection
New Patriot Ceramic coated headers
New Gauges with trim bezel and polished Aluminum back plate
New..... Doors, fenders, inner fenders, Tailgate with hidden latch inside tailgate,
grill support panel, both upper radiator supports, hood hinges/springs
New door hinges, handles, latches, striker plates
New smoked door glass and backglass with new rubber gaskets for backglass and windshield
New front sheet metal hardware kit (bolts,nuts,clips,spacers)
New body mounts
New front and rear tires (front 285/30/20 Rear 335/25/22 )

Misc parts....

20' 3/8" stainless fuel/transmission line with fittings for 700R4 transmission
12qts. Synthetic Trans fluid
3qts. gear oil for rear end
Stock front grill in like new condition
front and rear stock bumpers
Chrome 20" wheels (on truck)
several boxes of misc. new parts and pieces

Frame was sandblasted metal prepped and painted with POR 15 chassis black.

I do not have the bed sides or front of bed or a hood. All those pieces new, would cost $2200 from LMC.