'71 Chevy Vega GT Street/Drag Race Car
Body:
The engine, transmission, firewall, floor, dashboard, steering, foot controls and seats have been moved back 16”. The entire rear floor was removed and replaced with aluminum panels and widened wheel tubs. The battery is in the trunk. The inner front fender panels were partly removed and lightened. The hood is fiberglass with a functional cowl induction air scoop. Both doors have been lightened. The right side door window mechanism was removed. The heater and windshield wiper mechanisms were removed. Plexiglass windows were installed. The car's total weight is 2320 lbs. The weight distribution (front/rear) is 49.5/ 50.5. Rear signal and brake lights operate sequentially. The paint scheme is Mid 70's /w patina :-).
Interior:
Color – Black
Gauges – all Stock + O2 Sensor, Oil Pressure, Water Temperature, Amp. Meter
Rear seat has been removed
Bucket Seats
New Black Carpet
Engine:
355 cu. in., four bolt main, 1971 Chevrolet V8 with TRW forged aluminum10:1 pistons - Steel Crankshaft - Summit Stage II connecting rods - Milodon deep sump oil pan - high volume oil pump w/ welded pickup
Ported & port matched, polished ProMaxx aluminum heads w/ ARP 7/16” screw-in rocker studs, Competition Cams Roller Valve Springs (1.500” diam.) - Hooker Long Tube Headers
Chet Herbert Mechanical Roller Cam Shaft, 242 deg. Duration (In. & Ex.) @ 0.050” and 0.550” lift - Harland Sharp roller rockers - Cloyes True Roller timing chain - Iskenderian Chrome Moly Tubular Pushrods and Guide Plates
Holly 750 Mechanical Double Pumper w/ ProForm main body is mounted on a 1” Plastic Carburetor Spacer and a port matched, dual plane Edelbrock Air Gap Performer RPM intake manifold. A Holley pusher electric fuel pump is mounted near the fuel tank.
MSD-6A Multiple Spark Discharge Ignition and coil are mounted inside the cabin, away from engine heat
Pre '75 car – NO SMOG TEST REQUIRED
Transmission:
1984 Chevrolet, three speed Turbo-Hydrornatic 350, /w B&M full Competition Trans-pak Shift Kit - Hurst Line Lock – Hurst Dual Gated MegaShifter - B&M Holeshot 2400 torque converter with a 2,200 rpm stall speed - Derale Transmission Pan - TCI Transmission cooler mounted in the rear
Third Member:
Narrowed '69 Ford 9" 3rd member /w a 3.73 Track Lock differential - shortened 31 splined axles - Shortened and balanced drive shaft /w Safety Loop
Chassis:
The unitized frame has been reinforced with a tubular sub-frame connector from the transmission mounts back to the rear bumper. The car has been back halfed and tubbed. Strange adjustable coil-over shocks and Alston ladder bars hold the third member in place. There are 40/60 adjustable drag shocks and V8 Vega springs up front.
The Front tires are Michelin XZX 165SR15 mounted on 3.5"x15" Weld Racing Draglite wheels. New rear tires are 29”x15.00"-R15LT Mickey Thompson Sportsmans S/R Radials mounted on 12"x15" Draglites.
Miscellaneous items that go with the car:
Complete front wheel hubs w/ brake rotors and calipers
New Tie Rods /w new ends
Spare Left and Right Doors (complete)
Spare Rear Hatch Door (complete) + extra window glass
A pair of Hoosier Racing tires mounted on aluminum wheels
A pair of magnesium, skinny Front Wheels
Aluminum, single plane, four barrel Intake Manifold
Several Engine Air Cleaners
Books, Records and Receipts
Various Interior pieces (rear seat, bucket seat back)
Specifications:
Car is fully licensed, has current CA Registration and is street legal
Make: Chevrolet
Model: Vega GT
Model Year: 1971
Mileage: 26,835 mi.
VIN: 141771U220695
Suggested Use: Street & Drag Strip
Vehicle Weight: 2320 lbs
Transmission Type: Turbo 350 Automatic /w B&M Shift Kit
Tire Sizes: 165 SR-15 F, 29-15.50x15 R
Engine Brand: Chevrolet
Engine Size: 355 C.I.
Compression Ratio: 10:1
Vacuum at Idle: 15 in mg
Camshaft Type: Mechanical Roller
RPM Range: 3500 rpm – 6500 rpm
Cam Specs @ 0.050” lift:
In. Duration: 242 deg.
In. Lift: 0.550"
Ex. Duration: 242 deg.
Ex. Lift: 0.550"
Lobe Sep: 112 deg.
Rocker Arm Type: Roller
Rocker Arm Ratio: 1.5 to 1
Carburetor Type: 750 cf/m Holley Double Pumper w/ mechanical secondaries
Carburetor List Number: 4150, Part Number: 0-4777
Intake Manifold: Port Matched Edelbrock Air Gap performer RPM
Header Type: Long Tube
Header Tube Size: 1-5/8" into a 3" Collector
Cylinder Head Type: Ported Aluminum ProMax 200 SB Chevy
Estimated Horsepower: 420 HP
Converter Stall: 2200 RPM
Rear End Ratio: 3.73 (Track-Lock)
Past level of performance: 12.2 sec @ 113 mph
Predicted level of performance (after recent modifications): 11.5 sec @ 120 mph