1967 Chevy Chevelle Malibu

1967 Chevrolet Chevelle Description

1967 Chevy Chevelle Malibu

136 Vin

I had this chevelle for over 10 years now. Worked on the car through out the years and life got in the way. Do not have the time to finish and lost interest. The Chevelle has a 350 motor in it, and a new/rebuilt Saginaw 4 speed transmission. I also have a 396 motor in pieces (SEE PICS). Underneath the car is pretty much new. The car needs to be aligned and a couple of dents need to be patched and needs a driver side floor pan. The car runs. The car was primed but never painted. It was garage kept the whole time I owned it. Clean title. I am not a car expert but I will do my best to list all the details about the car and items.

This is a list of the items currently on the car.

New Doors

New Fenders

New Hood

New driver side Quarter Panel

New Trunk Floor Pans

Doors, Fenders and Hood need alignment.

Doors are currently held with bungees for the time being until aligned.

New BF GoodRich G-Force Comp 2 All Season Tires

On Charcoal Gray Retro Aluminum Wheels

17x7 (Front) 225/45ZR 17 (Tires)

17x9 (Rear) 275/40ZR 17 (Tires)

New Disk Brake Conversion All Around

New Fuel Tank Kit

(Tank, Cap, Meter, Straps, Bolts, Insulation)

New Eibach Pro-Kit Lowering Springs

(2 ½ inches in the front, 2 inches in the rear)

New 2 ½ inch FlowMaster Dual Exhaust Kit

New MagnaFlow Stainless Steel Exhaust Tips

New Mini RPM Tachometer

Nice Rebuilt Saginaw 4 Speed Transmission

Transmission was disassembled and has new Syncros, Gaskets, Bearings, Rear Seal for Driveline, Snap. All Gears Glass Beaded and Repolished. Reconditioned Chevy BellHousing. New 153 tooth small 10.5 clutch Chevy flywheel. New small 10.5 pressure plate. New small 10.5 clutch disk. New throwout bearing. New pilot bearing. New clutch fork boot. Reconditioned shift rods and levers. Hardened steel pressure plate bolts. Nice original clutch fork.

New Flow Tech Headers

New MSD Ignition 6420 Capacitive Discharge 6AL Ignition with Rev Limiter

New MSD Ignition 8203 Blaster 2 Hi-Performance Coil

New MSD Ignition 8213 Chrome Universal Coil Bracket

New MSD Pro-Billet Distributor 8361 Chevy SB V8

New MSD 31353 Spark Plug Wires. Super Conductor Spiral Core 8.5mm (Black) with 90 Degree Boots.

New 4 Row Aluminum Radiator

New EdelBrock Elite Series Aluminum Valve Covers

New EdelBrock Elite Series Aluminum Round Air Cleaner

New Battery Tray

New Windshield Jar with Lid

New Heater Control Assembly

These are the list of parts that I have for the car

67 Chevelle 4 speed shifter handle

67 Chevelle 4 Speed shifter T handle adapter

Original bucket seats and bench seat

Bucket seats has original correct metal back and sides instead of the 68+ models that use plastic.

Original Cowl Vent Grill Panel

Front Metal Valance Panel

Manual Trans Center console (No Clock)

New front grille assembly (Ausley's Chevelle store)

(Front Grill, Grill Extensions, Grill Rivets, Head Light Bezels, and hood moldings)

New Rear Panel Kit (Ausley's Chevelle)

(trunk lip moldings, upper rear panel and lower rear panel moldings, taillight bezels

New Delux Weatherstrip kit (doors, trunk, window, verticals, hood, vent window, channel rubber, etc) (Ausley's Chevelle Store)

New Malibu Emblem Kit (Ausley's Chevelle)

(Grill Emblem, Fender Emblems, and quarter panel emblems)

New Rocker Panel Moldings (Ausley's Chevelle)

New Hood Loovers (Ausley's Chevelle)

New Door Handle Kit (Ausley's Chevelle)

New Front and Rear Bumpers

I also have a 396 motor in pieces. It came out of a 69 Chevelle. New EdelBrock Elite Series Aluminum Valve Covers and Air Cover for the 396. Original rebuilt Carburetor and original distributor. I have various pulleys and other parts that I will include.

I also have the original doors that will be included in the auction.

Spare tire, 2 Car manuals, 2 water pumps (a backup for the 350 motor, and one for the 396)

The door windows and rear glass is not installed. The door windows are on the original doors (which is included in this listing) and the rear glass is wrapped in a protective sleeve with the original chrome trim (SEE PICS).

This car is perfect for a restoration shop or for someone who is handy with cars and has the time. Just needs to be finished.

SOLD AS IS!!!

I will not assemble any parts.

Buyer is responsible to pick up parts and vehicle. I am willing to accommodate a little by storing certain parts in the vehicle when its time for pick up. It's up to the buyer.

Sale is Final!!

Local Pickup Only

Payment must clear bank before I will release the car. I will not accept cashiers check or check the day the buyer wants to pick up car. Full payment is required 7 days after auction.