Home / Ford /

pro touring resto mod show winner sema restored custom riddler air ride lowered

Price: Ask a price!
Location: Miami Beach, Florida, United States
Condition: Used
Make: Ford
Model: Mustang
SubModel: Fastback
Type: Coupe
Trim: fastback
Year: 1965
Mileage: 2,500
VIN: 5R09C138905
Color: Black
Engine size: Keith Craft 427 V8 553hp 575ft/lbs
Number of cylinders: 8
Fuel: Gasoline
Transmission: Manual
Drive type: rear
Interior color: Black
Vehicle Title: Clear

1965 Ford Mustang Fastback Description

1965 Mustang Fastback built by famous riddler winner Roger Burman from Lakeside Rods & Rides.This was a clean straight rust free car out of washington state that I bought over 12 years ago. I decided a few years ago I wanted to build a full blown bad ass pro touring car with no budget. It started by having a custom fabricated chromoly chassis built by a local chassis shop and then having it powder coated black. Once the chassis was built the car was sent to Roger Burman in Iowa were the build began.We first worked with Legendary car designer Eric Brockmeyer to put our and his vision in the design. The main vision of the car was to build a very clean pro touring car with clean lines and keep it timeless. That's why we stuck with Black/Black and Chrome. We knew I could never go out of style and would only look better with age.
The exterior:
The exterior of the car has 27 modifications that are almost unnoticeable. We took what already existed and just really improved it. From the front of the car we lowered the front valance 5" and added a solid black satin mesh insert. On the sides of the valance we recessed "4 fogs lights and at the bottom of the valance we molded on a small tasteful lip. The front bumper was narrowed and bolts were shaved. We also shortened the sides about 2 1/2 inches and then backed it into the car for a very tight clean look. There is over $10k in bumpers alone. The grill received the same black satin mesh and the small 3 fins on each side of the headlights were opened up and received the mesh also. The trim In front of the mesh was smoothened out and painted black to disappear. The led headlights are from a new style Harley.The hood is all steel and custom fabricated with mesh insets custom latch with release from inside and finished in gloss black on bottom same as top. The cowls and wipers removed and smoothened out. The side rockers we lowered about 2" for a lower look and to cover up pinch rails and look factory.The side indentations were factory buy only 1/2" deep. We decided to leave them were they were but just accentuate them. So from the front of the car we started with the 1/2" indentation and pushed it into the doors gradually to end up with about a 2" side air pocket by the back wheels. It looks factory and in the air pocket we added a mesh insert. We even created a small vent all the way through to cool the back brakes.Door handles and locks shaved with remote windows and trunk. One billet mirror painted black to match the car. The side grill vents were frenched in also. Baer 6 piston brakes and 14" rotors.Wheels are custom made by FORGE LINE. They have chrome step lips with a concave powered-coated gray center and a center lock. No bolts. Fronts 19/9. Rears 21/11.Wheels $11k alone.The back of the car received a small 1 1/2 molded in wing on trunk. Custom made gas cap cover with a satin Mesh rear panel.The tail lights are custom made to look like the factory ones just much more modern with LED lights behind. Bumper completely cut up and reworked to sit flush to body. Rear valance was lowered to match rockers with a license plate insert. Custom powder coated exhausts.Every single piece of the body was reworked and refitted with the straightest and smallest gaps possible. 1 million times straighter and tighter body lines then when it came from the factory. The paint is the deepest black mirror finish you have ever seen! The body lines from every angel are insane!
The interior:
The interior on this car is just as nice as the outside. It's all custom but very clean and not all complicated. The dash is custom made with only 2 classic instruments gauges one for speed one for RPM. There is a small 3rd gauge bellow dash showing gas, il, ct. Behind the two gauges in the dash there's black satin mesh with unnoticeable A/C vents coming through. On the passenger side there's also a black mesh insert with hidden A/C vents behind. Top of the dash is finished in leather and suede while the front of the dash is finished in gloss black. Ididit tilt steering column with a painted black MoMo steering wheel. A custom gloss black center column was made with two hidden doors that hide all the gauges like Stere, /C, nbsp;key switch, nbsp;lights, nbsp;windows, nbsp;ect... So when you are in the car you see no messy switches unless you need them. Custom made shifter and boot with a short shift kit. The seats were made to be supportive and finished in leather and suede with chrome insert.The door panels follow the theme of the seats and dash also finished in leather chrome and suede. Hidden door poppers in doors. The back panel custom made with leather and metal inserts to cover up wheel tubs and JL audio subs and speakers for the hidden Alpine system. Porsche black carpeting and custom made pedals.Headliner pillars and roll-bar all covered in suede. Electric windows, intage AC, ower steering. Shoulder mounted seat belts.Trunk also finished in same leather suede and chrome with hidden battery behind panels with remote or manual release.
Under the hood:
The motor is made by Keith Craft racing, t is 427 cubic inches and it dynoed at 553hp/575Ft/lbs finished with custom valve covers and a custom air intake behind a 750 holly carb.Billet specialties powder coated serpentine pulley system. Custom made headers. T-56 6 speed tranny. Center force clutch. Double electric aluminum radiators. Billet hinges. Everything clean and hidden under the hood with smooth custom made panels for a extremely clean and simple look.
Under the car:
The underneath of the car is just as amazing and the exterior and interior. Custom made powder coated gloss black chromoly light weight chassis. Smooth floors.RIDETECH adjustable coil-overs. 9" ford rear, ini tubs, 1 spine axles. Denny's driveshaft. Custom exhausts. Custom made gas tank. True track center section. Sweet narrowed power steering rack. Baer 14"slotted breaks. Everything under the car has been made so there's nothing dragging low it's all pretty much flush with the chassis. Very clean very cool.
Summary.
I've seen some cool mustangs built over the years by some good builders but most all look like they are going to get dated fast with crazy colors and wild finishes. But this Mustang was built to be the opposite of that. Every single piece of this car was well thought out and is very custom but not way over the top. This car has 4000-5000 hours of labor into it and many expensive parts and one off parts made for it. It took over 2 years and over $400,000 to build.I know it sounds high, ut if you ever had a car of this level built you know what it takes.Here's your opportunity to own the nicest, ump in, urn key, astback mustang in the country.
there are over 300 pictures including some pictures while it was being built in the the link here:https://www.flickr.com/gp/neil-/4RT191/
Lakeside Rods & Rideshttp://lakesiderodsandrides.com/
HIGH DOLLAR TRADES PLUS CASH WILL BE CONSIDERED, O MOTORCYCLES
if you are a serious buyer, nd can buy this car but you have questions please call 305 502 7470do not call for information on how to build your car, r where you can find the parts (wheels,engine,lights) this is a "for sale" listing and questions should be for those that can afford to buy this car only.
Payment Terms:Wire transfer only.$10,000.00 non-refundable deposit in 24hours of agreed purchase, alance within 10 daysonce funds clear we will help assist in shipping anywhere in the world.
Thank you

More Ford classic cars for sale