1963 ford truck Crown vic swap.

1963 Ford F-100 Description

This is a 63 f100 with a 64 long bed. with 2004 Ford crown vic running gear frame floor etc. It is a project but does run and drive has complete crown vic firewall floor engine compartment brake system. heat/A/C wireing harness has already been cut down to eliminate all of the excess which is sitting on the seat. I have the 63 gauge panel to blend the cv cluster into. cv steering column is all still functional with column shift. I had planned to change it out for an original style column. The cab is welded in place and mounted seam sealer is not yet done. the bed is temporary mounted and will need finished out I have the bed floor it needs to be raised to fit. the finished bed will be only about 10-12 inches deep. without major rework. then the bottom is up to you. I was going to take the easy route and do a wood floor.fuel tank is mounted. You Can drive this thing. its almost done. the frame was stretched 14" to make up for the long bed which is what I preferred. if you remove the same amount it will be the same as a short bed. The driveshaft is from an extended cab ranger which fits with this configuration. I put Glass pack mufflers on it new to replace the stock mufflers and make up the difference for the longer wheel base it still reaches the back of the truck. and It isnt even loud. as I expected. And honestly wanted. here is what needs done to really drive. tail lights need hooked up wiring is already there. Headlights and front turn signals. the 63 wiper motor is still in place and I have never tried it, but have no reason to believe it isnt good. needs wired up to a switch. wiring is there I started with a good running police cv with everything working. so all of the systems are still intact. heat a/c ducts may take some work but functions as it is. The 63 frame numbers are in great shape and in place. also have the title for the cv. right cab corner is rusty and the bed has the hole for the tool box which I have a panel made to cover. I have a fair tailgate as well as a spare parts one. I have a pretty good hood the one on the truck is not good. I will switch it out. for any more info please call 316-807-5372