1976 GMC K-10 Sierra Fenderside 4x4 4spd 350 V8: C-10 / K-10 GMC Chevrolet Truck

1976 GMC Sierra 1500 Seirra Description

1976 GMC K-10 Sierra Fenderside 4x4 4spd 350 V8 Pickup Truck
This truck runs and drives but it will need a head gasket. 4x4 works great. The 350 fires right up and sounds tough. The 4spd manual transmission and transfer case shift well. It has 31in tires with around 85-90% tread left. Fenderside wood bed is straight and rust free but it will need new wood. Odometer is not working, stuck at 99,452.
Drivetrain: The 350 V8 runs but i believe it will need a headgasket due to oil in the coolant. Has an edelbrock intake manifold and carb. Transmission and Transfer case shift well. Locking front hubs turn easily. Stops and steers well. 31x0.5x15 tires @ 85-90%
Exterior: The driver side front fender is in very good shape, passenger side front fender is missing the bottom 10 inches and the fender lip could use some attention. Passenger side bed fender has some dimples but the drivers side is very straight. The bed is rust free and straight but the wood will need replaced. The hood has a crease in the center which makes it a bit whonky but it does shut and open. Tailgate says CHEVROLET. Aftermarket sunroof which leaks. Paint is fair to poor.
Interior: Grant Steering wheel, 8 ball shift knob. Seat is ripped up on the drivers side. Drivers and passenger side have some rust holes in the floor. Windows work. Glass is good. Wipers do not work, neither do the gauges. Headlights / Tail lights / Turn signals work. No HVAC controls. Push start with key.
Conclusion: A solid vintage project truck with endless possibilities.