1976 Toyota Land Cruiser FJ40 | Frame Off Resto-Mod

1976 Toyota Land Cruiser Description

• Frame off spray of the body panels/pieces in Toyota Dune Beige. Rear quarter panels and the front fenders were replaced with new pieces during the resto. There is a flat spot in the paint on the driver's side rear quarter panel where a mark in the paint was resprayed...not very noticeable, but you can see if the lightening is right.
• Frame was fully removed and sand blasted and then epoxy coated in black.
• New springs and shocks all the way around from Cool Cruisers. It's roughly a 3 inch lift.
• New lighting all the way around the truck.
• New swing away rear bumper for the spare tire and jerry can holder (the swing away is extremely sturdy...it's a great addition to the truck!).
• New period correct OEM hub caps purchased for all five tires.
• New Toyota rims sprayed black
• 31x10.50r15 tires have about 2,800 miles on them. Could easily put 33" or 35" tires on if you wanted that look. Larger tires is the only thing I would do if I kept the truck.
• Roof was resprayed period correct white color
• Badlands winch mounted on super sturdy front steel bumper. Winch has a plug-in external hand control. Not a super expensive winch, but it does the trick if you really want to take this rig off-road.
• I also have half soft doors, full soft doors, and a like new bikini topthat I will include in the sale if the price is right.

• The truck has the full factory roll cage, which includes the front portion of the roll cage that comes down the A pillar and mounts in the front footwells.
• Interior of the the truck was blasted and sprayed in Toyota Dune Beige. Many of the floor surfaces were painted in flat paint.
• Front and rear seats were rebuilt and refurbished/recovered in new material. They are in perfect shape.
• New rubber seals around all the windows (except the small flip-out windows in the front doors) and door closures
• The dash gauge cluster was redone with LED lighting (so you can actually see the guages at night!)
• Below the dash toggles there is an aftermarket water temp. gauge and oil pressure gauge mounted to a steel plate that has been welded into the dash plate (it looks factory).
• New cubby box installed with Bluetooth mounted CD player. Also has separate DC and USB outlets. The subwoofer volume control is also mounted inside the cubby box.
• Speaker system is four Alpine speakers with independent mounts that are secured to the roll cage (can easily be removed if you want to change it). There is also a subwoofer mounted under the driver's seat with an amp.
• New headliner was installed.
• Interior LED dome lights (front and rear) mounted to the roll cage. These really light up the interior at night! Each light has a separate on/off switch.
• Front and rear heater system works perfect.

• Has the factory 6 cylinder 2F engine with 4 speed manual transmission.
• The following was done to the engine and ancillary components: cam was rebuilt, the head was rebuilt, new valves, new pistons, new water pump, new alternator, new carburetor, new distributor, new voltage regulator, new thermostat, new master/slave cylinder.
• Transmission and T-Case have new seals. Also new clutch and pressure plate.
• New axle bearings and seals.
• New gas tank and electric fuel pump.
• Radiator was chemically cleaned.
• Rear axle was upgraded to disc brakes.
• Power steering was added.
• Differential breathers are routed to a small independent air filter in the engine compartment.
• Fuse box is moved to the engine compartment (easier to access than the stock location).