1950 Chevy Truck 3600 - Fleetline 3/4 ton - NO RESERVE
1950 Chevrolet Other Pickups 3600 Fleetline Description
****Before bidding please read everything. Truck is exactly as describe.****Buyer is completely responsible for shipping of the truckPlease do not bid on the auction if you don't have funds for the purchase, this is what happened to the last winner. The owner passed away so I am helping to liquidate his collection for family. This is a great truck very solid. It's not mine and I have very little history so please as any questions you have and I will do my best to answer them.Serial # 3HR-C 3245Engine #: AHCA332774
**Exterior**--PaintThere is a good paint job on the truck. I have a lot of project going on so I am limited on the amount of time I could work on it. I spent about 4 or 5 hours on the hood, both front fenders and the front windshield pillars using first rubbing compound (2 applications) and then followed up with 2 coats of wax and it turned about beautiful, I would love to see the results of it getting professionally buffed out with a machine. On the whole body I only saw one small hail dent on the hood and no other dents. There are a few scratches, nothing major, one going through to metal on the front passenger fender real thin but going about 2 to 3 inches. There is no rust anywhere on the truck except small amount of surface rust under the truck and then the both floorpan will need to be treated for rust or "possibly" replaced but that is it that I see, all of the pictures should show what you need but please let me know if you would like any other pics in a specific area.--ChromeThe door handles have some pitting on the tops. I'm not sure how that would be handle by re dipping in chrome or new ones but I believe this are the good quality originals. The hub caps have scratches and some pitting. I spent about 20 minutes on the front passenger side one to give an example of what they would like with a little elbow grease and again if it was machine buffed it wouldn't be perfect but I wouldn't replace them.--GlassAll glass is intact and in good condition. I would think the front windshield gasket will need replaced, maybe. :) The others look good to me and not cracked that I can see.--Bed of the truckWell this is one of the sad parts. I think the bed was replaced a few years back but was not sealed. I washed it with the pressure washer to give an idea of what is going on but not sure what will need to be done. Personally I would probably sand them down, seal them and flip them over but I don't know what someone else could do, just depends on what you're going to do with the truck**Interior**This is the best part of the truck to me. It looks great and all of the pieces are there. Again the floor pans will be the only thing that needs attention. There is a knob just under where the ignition key goes in that I think opens the cowl vent on the top vent that is missing a knob but I don't think it is missing anything else. No rips or tears in the seat, it needs to be dusted/cleaned off just from sitting. There is no mildew on the interior.**Mechanical**Cold start video - https://youtu.be/OmNy2CPFMssAfter sitting the two years I had to empty the tank,replace the fuel pump(I kept the old style one), and rebuild the carburetor and it fired right up and it ran great. The emergency brake engages and holds. The brake went to the floor and I checked the master cylinder and it was dry...I don't know why. I filled it with brake fluid and gravity bleed it (didn't have any helpers at the time) just to show the components were working. After that I took it for a little test drive and went though all of the gears and it drove great. Also I don't know what area this would go under but the tires have plenty of tread but are dry rotted. They would be fine for parades and getting to car shows but at some point would need replacing.Bed size 87" long and 50" wide
More Chevrolet classic cars for sale