Home / Chevrolet /

1967 Camaro Convertible R/S Clone, Procharged LS2, 6 Speed 525 rwhp

Price: Ask a price!
Location: Billings, Montana, United States
Condition: Used
Make: Chevrolet
Model: Camaro
SubModel: Convertible
Type: Convertible
Trim: Convertible
Year: 1967
Mileage: 2,500
Color: Cyber Gray Metallic
Engine size: Procharged LS2
Number of cylinders: 8
Fuel: Gasoline
Transmission: 6 Speed (Stage 2)
Drive type: RWD
Interior color: Black
Options: Convertible, Leather Seats
Vehicle Title: Clear

1967 Chevrolet Camaro Convertible Description

For sale is my project for the past 10 years. It is a totally custom 1967 camaro convertible. It is a rotisserie restoration (I have pics) with virtually every piece and part replaced. It has custom paint and smooth firewall. The engine bay is painted to match the exterior as well as the dashboard. The R/S lights function as they should. It has dyno mat installed in the cab area and the entire underside and cab area are treated with raptor liner epoxy bed liner so it will never rust again. It also has Dakota digital VHX gauges and ididit tilt steering column. It has a NEW (from the dealership, not a transplant) LS2, 430 hp crate engine. Mounted on that engine is a D1SC procharger. This combo has been dyno'd and produces 525 rwhp (have the dyno sheet) on just 5 lbs of boost. Backing that power plant is a stage 2, T56 six speed rated at 700hp with a centerforce racing clutch, custom drive shaft and moser 12 bolt rear end with 4:56 gears (with the 6 speed it runs down the highway at 70 mph at 1900rpm). It also sports Detroit Speed and Engineering 3 inch lowering leaf springs, low profile caltrac (traction system) and Hotchkis convertible sub frame connectors (still in the box ready to be installed. She also has 6-piston front and 4 piston rear Wilwood disc brakes, and custom torque thrust 18 inch wheels. The sub frame and suspension is all power coated and the front has tubular control arms and coil over adjustable shocks. I also have many additional parts from this and other builds. It all goes with the sale. The list goes on and on. I'll do my best to list everything below.
It has a clean title however it is a state issued vin. When I bought the car there was no title and the vin was unreadable so I went through all the proper agencies and procedures to acquire a state title. This is absolutely legit and can be transferred to any state. The only difference is it doesn't have a GM vin anymore.
Now for a few things that are still outlying: Reverse light power not hooked up yet, wire came loose on the pass electric seat motor, needs to be reattached. There is no heater or provisions for one.
I drive this car as much as possible as that is what it was built for. This is no trailer queen and does notdeserve to be garaged the rest of its life. That's why I went through all the hassle of rust proofing and bed lining the underneath. If you like driving, you'll love this car. Remember this car is driven and such has someblemishes.
Now I am sure you are wonder why I am selling. Well I am in the military and have been, and will continue to be, moving around a lot. I can't keep dragging it around with me and with a potential overseas assignment it definitely can't go with me. I'd hate to see it sit around for the next 2-3 years. As it stands now, it is located at my father's house in Billings, Montana, as I couldn't take it with me to my current location.
Here is a detailedlist of modifications and work completed on the car:
New Crate LS2 (have the receipt) (not a transplant) $7000
T-56 with stage 2 rebuild kit $2000
Custom paint and rotisserie rebuild $10,000
Griffin 4 core aluminum radiator $350.00
R/S headlight conversion kit $1100.00
D1SC procharger $2000
A&A procharger bracket $660
Custom intake tube$ 350Royal Purple Fluids only used for the engine
Custom engine tune $500
Ceramic headers $550
Magna Flow stainless exhaust $350
Powdercoated subframe, and tubular control arms $800
Smoothed firewall
Aeromotive complete fuel system $450
Aeromotive 67 Camaro stealth tank $750
All steal braid fuel hose $200
C5 corvette brake booster and master cylinder (New) $300
Custom Taylor spark plug wires $90
Corvette LS2 Engine covers $150
Custom power bucket seats (leather) $1000
New carpet
New canvas convertible top
Dakota digital VHX gauges (blue) $800
Recovered back seat and panals
Hotchkis sub frame connectors $400
DSE 3 inch lowering spring $350
Caltrac low profile traction bars $350
Moser 12 boltreared w/4:56 gears $2250
18-inch torque thrust wheels $2000
Wilwood 6 and 4 piston disk brakes $2000
Quick ratio power steering gearbox $250 At this point alone there is over $35,650 in parts not counting any body panels.
New L & R front fenders
New L & R full quarters
New upper and lower valance
New upper cowl
New L & R Fill doors
New windshield
L & R inner and outer wheelhouses
New full floor pan and bracing
New L & R rear frame rails
New complete trunk pan
All 4 cocktail shackers
New trunk lid
New cowl hood
There is nowarrantee for this vehicle.

I am sure I missed a lot but the pics should speak for themselves.
You cannot build this car for half of what I am asking. Labor alone would cost that much.
A $500 deposit is due immediately at the end of the auction with the remainder due within 7 days of the auction ending via cashiers check. Car must also be picked up within 7 days.
If you aretruly serious about this car, please call me at 443-six03-8673. Please do not call me if you are inquiring about the build so you can build your own.
Buyer responsible for all shipping and arrangements, but this car can be driven anywhere!
Thanks for looking.

More Chevrolet classic cars for sale